Sunday, August 18, 2019
How Plot, Setting and Characters Influence Readers Response Essay
How Plot, Setting and Characters Influence Readers Response The writer of a fiction text uses plot, setting and characters to create imagery and influence the reader's response to how the author wishes the reader to perceive a situation. This can be done through many methods, which include detailed descriptions of any settings, detail of weather, characters stereotypical of society and colour association. In the novel "Lord of the Flies" careful attention is payed to the way the in depth descriptions of the island was used to create imagery and pursuade the readers response. For example on page 14/15, there is much emphasis on the brightness and colour of the island. This influences the reader to think that the island is like a tropical paradise full of joy and happiness. Characters in fiction texts have characteristics that are described by the author and have certain features that all contribute to the 'characters profile'. Their profile can be built up using many methods as was done in "Lord of the Flies". Each of the main characters had a meaning to their name; for example Ralph's name was derived from the Anglo-Saxan language, meaning 'counsel'. Jack's name, Hebrew in origin means 'one who supplants', reflecting his use of force. Piggy's name parallels the wild pigs that are hunted on the island and also reflects his superior intellect. Simon's name comes from the Hebrew word, which means 'listener'. Roger's name, Germanic in origin means 'spear'. Characte...
Saturday, August 17, 2019
Hybrid car
Facts about Hybrid Cars: Some important facts about hybrid cars:- Hybrid vehicles are a practical solution to the rising greenhouse gas levels and may still be some time till these cars are introduced into the market. Auto Makers like Honda and Toyota have taken initiatives to improve on the existing Hybrid technology by inventing cleaner engines that also give more mileage. A Hybrid vehicle is one which uses an electric motor to provide additional power along with the conventional internal combustion engine. They have a special mechanism that is capable of recharging the batteries without being plugged in.They can also be charged by the gas-engine if need be. As a result, the gas engines can be a little smaller as there is an additional power supply for its aid. The advantage is that the gasoline engine can then be quite small, since power is obtained from not one but two sources. When the car comes to a sustained stop, the gas engine shuts down saving fuel. When the car is ready to accelerate, the electric motor kicks in till the time the gasoline engine can resume on its Job. Hybrid Subs may be the alternative to those gas-guzzling, pocket- ripping Subs which could manage very little mileage.EPA mileage estimates about 33 MPEG as city/highway average. The Toyota Pries is estimated to give an average of 55 MPEG. Apparently, it has a better mileage in city conditions rather than the highway. That's because the battery pack comes into use more frequently in city conditions than on the highway. Advantages of Hybrid car: Hybrids combine clean energy of the electrical motor with the power of the gas- powered engine which results into lower emissions and better mileage. Thanks to the ever improving technology, hybrids perform at par with the normal gas-powered vehicles, if not better. Hybrids are reliable and comfortable as any traditional car ND they have a tax benefits(only till 2006). There are purchase incentives for Hybrid vehicle owners (varies by state). Hyb rids are much cleaner cars than normal vehicles with lesser CO and other greenhouse gas emissions. Hybrids provide a better mileage. The future for hybrids looks bright with rapid developments in hybrid technology to improve engine efficiency. Due to the Regenerative Braking technology, the batteries need not be charged by an external source. Disadvantages of Hybrid Cars: Hybrid cars, though useful, have some disadvantages.The point to be noted here is that the advantages far exceed the disadvantages. High cost: hybrids cost anywhere from $2,000 to $5,000 more their non-Hybrid versions. More weight due to battery packs. Some states charge additional fees for registration. In the event of an unfortunate accident, there is a risk of exposure to high voltage wires. They have a complicated system which needs to be taken care of by experienced mechanics only. Spare parts maybe hard to find and may be costly. Usually, hybrids have a lower acceleration than that their normal counterparts.T he hybrid car can be considered to be the car of the millennium. This is a very environment friendly car that hardly produces any combustion at all. This is a car that basically runs on two sources of energy; one being a fuel, and another a battery. With the presence of two sources of energy to the hybrid car, there is obviously a lower requirement of fuel in the car. This is because most of the driving is managed with the energy the battery provides. The battery provides sufficient energy for the driver to use the car for its normal uses of transportation.
Friday, August 16, 2019
Harnessing Solar Energy
Harnessing of Solar Energy: Photosynthesis versus Semiconductor Based Solar Cell Photosynthesis and semiconductor-based solar cells are both used to harness solar energy from the sun ââ¬â photosynthesis for plants and semiconductor based solar cells for human beings. Photosynthesis consists of light reactions and dark reactions. It is a process in which carbon dioxide (CO2), water (H2O) and light energy are utilized to synthesize an energy-rich carbohydrate like glucose (C6H12O6) and to produce oxygen (O2) as a by-product.Simply put, photosynthesis is a process that transfers energy from the sun (solar energy) into chemical energy for plants and animals. Photosynthesis is a vital process among plants, algae and some bacteria that are able to create their own food directly from inorganic compounds using light energy so that they do not have to eat or rely on nutrients derived from other living organisms. A semiconductor-based solar cell is devised to convert light to electric curr ent.The solar cell directly converts the energy in light into electrical energy through the process of photovoltaics (a field of semiconductor technology involving the direct conversion of electromagnetic radiation as sunlight, into electricity). Solar cells do not use chemical reactions to produce electric power, and they have no moving parts. Most solar cells are designed for converting sunlight into electricity. In large arrays, which may contain many thousands of individual cells, they can function as central electric power stations analogous to nuclear, coal-, or oil-fired power plants.The conversion of sunlight into electrical energy in a solar cell involves three major processes: absorption of the sunlight in the semiconductor material; generation and separation of free positive and negative charges to different regions of the solar cell, creating a voltage in the solar cell; and transfer of these separated charges through electrical terminals to the outside application in th e form of electric current. Comparisons Photosynthesis and semiconductor-based solar cells both get their energy from the sun and convert it into a form that is needed either by plants or humans (Vieru, 2007). The first two steps of photosynthesis involve capturing photons released from the sun and using that energy to create a flow of electrons. From there, photosynthesis involves using that electrical energy to create chemical energyâ⬠(Stier, 2009). The products of photosynthesis are sugars to feed plants. Semiconductor-based solar cells also capture photons that use energy to create a flow of electrons which create electrical energy. A final similarity between photosynthesis and solar cell technology is that ââ¬Å"a semi conductor has solar cells that trap energy from the sun and convert it into electricity.Plants have cells that trap energy from the sun and convert it into useful productsâ⬠(Haile & Oââ¬â¢Connell, 2005). Contrasts The first contrast is in the conv ersion of energy trapped by the sun ââ¬â photosynthesis converts solar energy to chemical energy used by plants and semiconductor-based cells convert solar energy into electricity used by humans. The solar panels for semiconductors are manmade and photosynthesis comes from a natural process. Finally, photosynthesis has been around for billions of years making it the oldest technology on earth (Stier, 2009).Charles Fritts created the first solar panel in 1883 which means the semiconductor has been around for about 229 years ââ¬â a mere zygote to photosynthesis. Thermodynamics Semiconductor-based solar cells and photosynthesis both use the laws of thermodynamics. Thermodynamics is the study of the conversion of energy between heat and other forms, mechanical in particular and it has three laws. The first law of thermodynamics says that energy is conserved, it is neither created nor destroyed but can change form. This is called energy conservation.The second law of thermodynami cs says that systems always tend to be in states of greater disorder. As disorder in the universe increases, the energy is transformed into less usable forms. The third law of thermodynamics is usually stated as a definition: the entropy of a perfect crystal of an element at the absolute zero of temperature is zero. Thermodynamics apply to photosynthesis by plants transforming sunlight energy into food ââ¬â this is an example of the first law. During the process of photosynthesis plants also lose energy because they to not convert all of he energy trapped from the sun into food. Some of the energy is lost in the process ââ¬â this demonstrates the second law of thermodynamics. Plants needing to trap energy from the sun constantly demonstrates the final law of thermodynamics because the cycle is repeated. In semiconductor-based solar cells energy from the sun is converted to electricity ââ¬â this is the first law. Because energy is lost in the conversion, the second law of thermodynamics is applied here. Finally, the cells have to continually obtain energy from the sun which obeys the third law of thermodynamics (Heckert, 2007).Solar energy has been around for billions of years whereas semiconductor-based solar cells have only been around a little over 200 years. In writing this, I have discovered that solar energy is harnessed by both photosynthesis and semiconductor-based solar cells to convert energy into food and electricity to be used by plants and human beings. Both photosynthesis and semiconductor-based solar cells utilize all three laws of thermodynamics by converting energy, losing energy, and trapping energy constantly. This shows the many similarities and differences between photosynthesis and semiconductor-based solar cells.
Thursday, August 15, 2019
Tourism, a factor of sustainable development
All forms of tourism development that are conducive to saving rare and precious resources, in particular water and energy, as well as avoiding so far as possible waste production, should be given priority and encouraged by national, regional and local public authorities; To minimize the use of scarce and non-renewable resources in the development and operation of tourism facilities and services. A sustainable future depends on the careful management of resources to ensure their availability for present and future generations. Resources that are non-renewable, in limited supply, or essential for life support are of particular concern. These include land, fresh water, forests, minerals and fossil fuels. Conservation of energy is important, especially where it is derived from non-renewable resources. Tourism is a signiï ¬ cant user of resources in many areas. Ensuring that it uses resources eï ¬Æ'ciently is important both for the wellbeing of the local environment and host community and in maintaining global resources. Eï ¬Æ'cient use of resources, notably energy derived from fossil fuels, is also important in the reduction of polluting emissions. Resource eï ¬Æ'ciency in tourism will be achieved largely by changing the consumption patterns of tourists and tourism enterprises. Enterprises should be encouraged to establish environmental management systems to minimize impacts and drive a process of continual improvement. To minimize the pollution of air, water and land and the generation of waste by tourism enterprises and visitors. Maintaining environmental purity means reducing waste and harmful emissions to the environment in order to preserve the quality of the air, water and land that sustain life, health and biodiversity. Actions should address all aspects of pollution prevention and control throughout the lifecycle of tourism development, during and after the use of facilities, as well as the impacts of tourists themselves. Although local impacts on the environment, such as local air and water quality, are the most immediately apparent to local communities and to visitors, the tourism industry also has global environmental impacts. Governments need to recognize the responsibilities towards both the global and the local environment that are inherent in maintaining environmental purity. There is a need for a profound change in the way we generate and use energy and in other activities that release greenhouse and other gases into the atmosphere. Global pollution may also impact many local destinations through the consequences of climate change. As with promoting resource eï ¬Æ'ciency, waste and pollution control will be achieved largely by changing the consumption patterns of tourists and tourism enterprises. This should be a key component of individual environmental management systems within enterprises.
Wednesday, August 14, 2019
Huggies Mamy Poko Company Backgorund Essay
Kimberly Clark is founded in 1872 at Neenah, Wisconsin and is headquartered in Dallas, Texas. It is passionate about providing people with essentials for a better life by adding convenience to daily routines with some of the worldââ¬â¢s most recognized products. Kimberly Clark has approximately 58,000 employees worldwide and operations in 36 countries. Its sales have increased to $21.1 billion in 2012. Kimberly Clark has many global brands and one of them is Huggies. Huggies diapers were first introduced by Kimberly Clark in 1978, and theyââ¬â¢ve been improved nearly every year since. Refastenable diapers, breathable diapers and stretchy diapers are all Huggies firsts. At the controls of the Huggies innovation engine are everyday consumers. The art of understanding and anticipating consumer needs ââ¬â sometimes before consumers do themselves ââ¬â has led not only to product advances but the creation of whole new categories, businesses that didnââ¬â¢t exist before. In 1985, Huggies took leadership of the category for the first time, and has been the number one selling diaper in America since 1993. Today, Huggies brand introduces a demonstrably better product every year, and the imperative to innovate extends far beyond the Huggies diaper franchise. Itââ¬â¢s no accident that Kimberly Clark offers consumers the number one or number two brand in 80 countries. Unicharm Corporation, MamyPoko Unicharm Corporation is a Japan-based company mainly engaged in the manufactured and sale of baby care products, feminine care products and pet care products. Unicharm is established on February 10, 1961. The company operates in three business segments. The personal care segment provides baby care related products, such paper diapers; feminine care related products, such as sanitary items, as well as healthcare related products, including incontinence articles for adults and powder puffs. The pet care segment provides pet food products and pet toiletry products. The others segment is engaged in the gravure printing, processing and sales business, as well as financial business. As of March 31, 2012, the company owned 40 consolidated subsidiaries and two associated companies. MamyPoko is a brand of the company Unicharm that focuses on pant-style diapers for babies. MamyPoko started manufacturing baby diapers since 1981. MamyPoko pants at present are sold in 14 Asian countries. MamyPoko pants come with a core that has maximum absorbent and moisture-locking capacity. MamyPoko diapers come in the following 3 types, MamyPoko tape diapers, extra soft fit and easy fit pants. Apart from manufacturing diapers, the brand also produces baby wipes, both in fragrant and non-fragrant varieties.
Tuesday, August 13, 2019
Final Project Research Paper Example | Topics and Well Written Essays - 1500 words
Final Project - Research Paper Example A training framework for employees in the application of the basic quality control tools is also created through this process (Tara, 2012). A storyboard is a visual display of the Quality Improvement story and normally it is mounted on a board in the area where the problem is occurring. This is because everyone can be able to see the problem and the progress made in solving process. A QI story has several uses: first, a team is able to organize, gather and analyze the data in a logical manner. Secondly, the progress of the team is also monitored (Tara, 2012). Third, the story facilitates the non members understanding of the process and the improvement. Lastly, the story makes it possible for presentations to be made to the management become standardized since everyone is familiar with the processes. The quality improvement story is a process that has several standard steps to be followed: 1. The problem area is identified 2. The causes of the problem are identified 3. The root causes of the problem are analyzed, identified and verified 4. The prevention action is planned and implemented 5. The effectiveness of the chosen action is checked 6. The process improvement is standardized 7. Future actions are determined Wellington hospital: Quality improvement story The wellington hospital conducted a quality improvement project which involved designing, developing, and implementing a quality improvement project that is based on accreditation. Team: 5 members Venue: wellington hospital building Team members: John smith Nelson Pulaski Dr. Theresa brown Rebecca Anderson Plan: to identify and plan for improvement in service delivery (http://www.thewellingtonhospital.com/) Identifying the problem area The areas for improvement were identified through the efforts of the team members and collaborations of the hospitalââ¬â¢s departments. According to a survey conducted on all the hospitals in the state by EPIC sponsored by the association for public health institutions. I n 2011, 58% of the residents in the state knew very little about the services and products offered at wellington hospital. A review of the data also revealed that the people had little awareness and the knowledge of the quality of professionals in the institution (http://www.thewellingtonhospital.com/, 2012). Schedule of the plan A committee of staff committed to the process improvement comprising of administrators as well as top level managers. The team members also include the members who contribute to the quality assurance process as well as contributing to the project conclusion. A matrix diagram was created to document and understand the approach to be adopted. A time phased schedule was also created for the completion of the project (Hitoshi, (1985), Understanding the chance AIM statement Capacity Breakdown of the capacity Levels of learning Increasing awareness of the services in the public health services Relationship with the media Find the contacts to the media Learn the p ricing for the advertisements Past relationships Writing capacity Increasing the capability of the staff Developing the writing process Learn the standard formats in article writing John will write releases for the press The minimal writing process Public health topics Research and findings on the issues in the public health The issues which the hospital is currently facing Information to be released to the media Basic knowledge
Monday, August 12, 2019
Maths coursework Essay Example | Topics and Well Written Essays - 1000 words
Maths coursework - Essay Example Although the function "y=10e^ (-0.175t)", slightly differ from the given values of the graph (between hour 4-7). However, for the all other points, the graph follows the same path as the one given. So we can say that the function "y=10e^ (-0.175t)", is suitable to model the data of the graph. Figure 3 represents the amount of the drug in the bloodstream over a 24-hour period. In the below graph (figure 3) assumption is made that after every six hour 10 Ã µg of drug is given to patient and it adds in the drug remained in the bloodstream ( value of constant a in function "y=10e^ (-0.175t)", will change after every six hours). Therefore, the function will change after every six hours as the remaining drug adds into the given drug every six hours. Initially the drug given was 10 Ã µg. After six hour, it remains to 3.5 Ã µg. Now when 10 Ã µg is again give to patient then it will become 13.5 Ã µg. Moreover, this pattern will be continues for every six hours. Since we wanted to plot for 24-hour period, so for the second, third and fourth period the function will be " y=13.5e^ (-0.175(t-6)) ", " y=14.7e^ (-0.175(t-12)) "and" y=15.1e^ (-0.175(t-18)) " respectively. The value of t is changed here, so that the graph plotted continuous from the last point, other wise it will start from the starting point. From the figure 5, it can be seen that, when after initially 10Ã µg of drug is given to the patient and thereafter no drug is given to the patients then the function "y=10e^ (-0.175t)" is when plotted for week period, the value of y approaches to 0 (actual value will be 0.0524 Ã µg) after 30 hours. However, it will never become zero. Figure 6 represents the amount of the drug in the bloodstream over a 24-hour period. In the above graph assumption is made that after every six hour 10 Ã µg of drug is given to patient and it adds in the drug remained in the bloodstream ( value of constant a in function "y=10e^ (-0.175t)", will change after
Subscribe to:
Posts (Atom)